cutting temperature - Globe Thesis

Keyword [cutting temperature] Result: 181 - 200 \| Page: 10 of 10
181.	Physical Simulation And Technical Parameter Optimization Of Turning Process For 304 Stainless Steel
182.	Experiment And Analysis Of Physical Properties Of Bearing Ring Surface Based On Nitrogen Jet Hard Turning
183.	Research On The Effect Of Laser Micro-texturing On The Cutting Temperature Rise Of High-speed Steel Tools
184.	Research On The Secondary Design And Influence Of Cutting 40CrMnMo Micro-groove Tool
185.	Research On The Effect Of Asymmetric Cutting Edge Of Cutting Tool Passivation On Cutting Performance
186.	Measurement of Transient Tool Internal Temperature Fields by Novel Micro Thin Film Sensors Embedded in Polycrystalline Cubic Boron Nitride Cutting Inserts
187.	Thermal Contact Resistance For TiAlN Coated Tool And Its Influencing On Cutting Temperature
188.	Effects Of TiAlN Tool Coating On Tool-Chip Heat Partition And Cutting Temperature
189.	Modeling Of Time-varying Cutting Temperature Field And Residual Stress Mechanism During Dry Whirlwind Milling Of Screw
190.	In-situ Measurement,Modeling And Application For Turning Temperature
191.	Research On Heat Dissipation Performance Of Heat Pipe Cutter For Green Machining
192.	Effect Of Ti On The Quality Of CFRP During Drilling Laminated Structures
193.	Study On Laser Shear Test Of Stainless Steel/Ceramic Composite Assembly
194.	Reserch On Drilling With Mql Of CFRP-Ti-CFRP Stacks
195.	Research On Cutting Performance Of Stainless Steel Based On Double Excitation Ultrasonic Elliptical Vibration
196.	Experimental Study On Preparation And Machining Of Ni60 Laser Cladding Layer
197.	Preparation And Performance Test Of AlCrSiN/AlCrN/AlCrON/AlCrN Multilayer Composite Tool Coating
198.	Research On High-speed Laser Cutting Technology Of Special-shaped Automobile Sheet
199.	Effect Of Ultrasonic Vibration-Assisted Milling On Surface Morphology And Corrosion Behaviour Of AZ31B Magnesium Alloy
200.	Research On The Mechanism And Mechanical Properties Of Surface Residual Stress In High-speed Cutting Nickel-based Superalloy
<<First <Prev Next> Last>> Jump to