discrete element method - Globe Thesis

Keyword [discrete element method] Result: 181 - 200 \| Page: 10 of 10
181.	Research On Dynamic Response And Failure Behavior Of Architectural Laminated Glass Under Hard Body Impact
182.	Study On Flow Characteristics Of Dynamic Asymmetric Impinging Stream Reactor
183.	Research On Evaluation Of Grain Retention Of Metal-Based Diamond Tools Based On Discrete Element Method
184.	The Ductile-brittle Failure Mechanism And Its Influence Factors Investigation Of Bottom Hole Rock
185.	Investigation On Burden Distribution Segregation Optimization Of Blast Furnace And Gas Solid Flow Characteristics In Blast Furnace
186.	Discrete Element Model Simulation And High-speed Photographic Experimental Study Of Dense Gas-solid Two-phase Transient Flow In Fluidized Bed
187.	Wear Characteristics And Prediction Of Scraper Conveyor Chute Under Multi-factor Coupling
188.	Discrete Element Simulation And Experimental Study On Filling Process And Mechanical Properties Of Mineral Composite
189.	Study On Mechanism And Performance Of Material-beds Comminution Based On The Discrete Element Method
190.	Experimental And Numerical Simulation Study On Burden Distribution Of COREX Melter Gasifier In Bayi Steel
191.	Design And Study Of Multidimensional Shavings Swinging Screen
192.	Quantifying The Non-equilibrium Characteristics Of Heterogeneous Gas-Solid Flow Using CFD-DEM Method
193.	Fluidization Characteristics Of Coarse Cohesive Particles In Gas-Solid Fluidized Beds
194.	Simulation And Research Of Dense Element Process For Block Chaos Vibration Molding Based On Discrete Element Method
195.	DEM Simulation On The Packing Densification Of Cubical Particles Under Vibration
196.	Research And Development Of Intelligent Monitoring And Controlling System For Coal Silo
197.	Research On Abrasive Flow Polishing And Material Removal Mechanism Based On Discrete Element Method
198.	Discrete Element Numeirical Analysis On The Wear Mechanism Of Micro-hole Wall Surface By Abrasive Flow Polishing
199.	Discrete Element Simulation On The Oriented Arrangement Of Carbon Fiber In Nylon Powders With Ultrasonic Vibration Assisting
200.	Experiment And DEM Simulation On The Viscoelastic Mechanical Behavior Of Rubber Bonded Particulate Material
<<First <Prev Next> Last>> Jump to