Font Size: a A A
Keyword [forging]
Result: 181 - 200 | Page: 10 of 10
181. Research On Microstructure And Properties Of Iron-based High Density Sintering Materials
182. Techniques Research On Extrusion And Precision Forging For Transit's Back-bridge Semi-Axle Shaft Sleeve
183. The Annealing Technics And The Ways Using Residual Heat Of High-Speed Steel After Forging (Or Rolling)
184. The Research Of Influence Law Of Near-isothermal Forging Processing Parameter On Grain Size And Mechanical Behavior Of GH4169 Alloy
185. Simulation Of Isothermal Forging For Superalloy And Analysis Of Thermal Load On Die
186. Forming Technological Design And Process Simulation Of Large-sized Drop-forging Of Ti-6Al-4V Alloy
187. Preform Design And Processes Simulation Of Isothermal Forging For PM Superalloy With Inclusions
188. Research On Numerical Simulation Of TC21 Titanium Alloy Forging Technology
189. Research Of Technology Of Cold Forging Spur Gear
190. The Research On Precision Forging Process Of Sucker Rod And FEM Simulation Of Its Deformation
191. The Research And FEM Simulation In The Upset Forging Process Of Double Frustums Sucker Rod
192. Optimized Die Design And Numerical Simulation For Hot Extrusion Process Of The Valve
193. Preform Optimization For Die Forging Process Of Turbine Wheel By Rigid Visco-Plastic FEM Simulation
194. Study On Low Cycle Fatigue Properties Of A4 Aluminum Alloy Forging In Corrosive Environments
195. The Research On The Microstructure And Mechanical Properties Of A Highly-alloyed TiAl-base Alloy
196. Applied Research About Thermal Resistant Layer Of Laser Cladding Cr3C2 On The Chamber Surface Of Hot Forging Die
197. Temperature Field & Stress Field Simulation And Optimization Of Hot Forging Die
198. Research Of The Stress And Strain Evolution On The Aluminum Alloy Hot Forging Die
199. Study On Fe Simulation Of Forging Process Of Heavy Axial Forgings
200. The Simulation Of Heavy Cylinder Forging At High Temperature
  <<First  <Prev  Next>  Last>>  Jump to