hardening - Globe Thesis

Keyword [hardening] Result: 181 - 200 \| Page: 10 of 10
181.	Investigation On The Effect Of Annealing Induced Hardening For Commercial Pure Aluminum Processed By Severely Plastic Deformation
182.	Research On Simulation Of Flexible Roll-forming Based On Non-linear Rotational And Kinematic Hardening Model
183.	Research On The Influence Of The Flue Gas Desulfurization Gypsum On The Properties Of Portland Cement
184.	Analysis On Mechanism Of Cleavage Fracture At The Lower Shelf Of Ductile-to-brittle Transition Of A Low Alloyed Steel
185.	Study On Microstructures And Properties Of Welding Joint Of X80 And 30CrMo
186.	The Research On Surface Hardening Technology And Self-sharpening Effects Of Hammers In Hammer Mills
187.	Study About Effect Of Si Content On Structure And Properities Of Cold Work Die Steel Cr8Mo2SiV
188.	Study Of Deformation Mechanism And Hot Rolling Process On The High Manganese Steels
189.	Effect Of Microstructure And Properties Of 40Cr Surface Modified Layer By Laser Beam Scanning Mode
190.	The Couple-field Numerical Simulation Of Electro-slag Furnace Induction Hardening Based On ANSYS
191.	The Influence Of The Dimension Ratio And Scale Effect On Plastic Flow Of Cylindrical SiC Reinforced Aluminum Matrix Composites
192.	Research On Preparation And Properties Of ZrN/Al-Si-N Multilayer Films And Al-Si-C-N Composite Films
193.	Research On Corrosion-resistant Hardening Process Under Liquid Nitriding For Austenitic Stainless Steels
194.	Research On Synthesis, Micro-structure And Mechanical Properties Of Ti-Al-N,Ti-Al-V-N Composite Coatings And Ti-Al-N/VN Multilayers Coatings
195.	Study On Grind-Hardened Layer And Its Uniformity
196.	Study On Thermal Deformation Behavior And Heat Treatment Process Of 0Cr13Ni8Mo2Al Stainless Steel
197.	Study On Secondary Hardening And Strength And Toughness Of Cr12 And Cr12MoV Die Steel
198.	Study On The Relationship Between Transformation Structure And Strength And Toughness Of New Secondary Hardening Steel
199.	High-speed Milling Used In Machining Of Spatial Curved Surface Weld Seam Of Stainless Steel Thin-walled Parts And It’s Surface Quality
200.	Study On Gelling And Water-resistance Of Phosphogypsum By Fast-burning
<<First <Prev Next> Last>> Jump to