parameter identification - Globe Thesis

Keyword [parameter identification] Result: 181 - 200 \| Page: 10 of 10
181.	Research Of Power Control System Design And Optimize Based On Chaos Optimization Theory
182.	Research And Development Of The 110kV Microprocessor Transmission Line Protection Device Based On DSP
183.	The Study Of Single-phase-to-earth Fault Selection And Fault Location Based On The Model Parameter Identification Method In Non-grounded Neutral System
184.	Vibration Test And Mode Parameter Identification Of Continuous Box Girder Bridge With Three-span
185.	Parameter Identification And Dynamic Compound Inverse Analysis Of Multi-ribbed Slab Structure
186.	Dynamic Modeling Of Hot Film Type MAF Sensor Used For The Engine With Various Components Coal Bed Methane And Air-Fuel Ratio Control Based On The Observer
187.	Study On Closely Spaced Modes Decomposition And Modal Parameter Identification
188.	Construction Control Research Of Long Span Single Tower Cable-Stayed Bridge
189.	Construction Control Research Of Long Span Concrete Filled Steel Tubular Arch Bridge
190.	Research On The Damage Identification Of Girder Bridge Structures Based On Minimization Of The Matrix Perturbation
191.	Damage Detection Of Girder Bridges Based On Curvature Modal Analysis
192.	FEM Simulation And Model Parameter Identification For MR Damper
193.	The Research On Identification Strategy Of Power System Aggregate Load Model And The Development Of Composite Load Modeling Platform
194.	Research On The Damage Identification Of Bridge Structures Based On Time-Domain Method
195.	Study On The Parameter Test System Of Permanent-Magnet DC Motor With No-Coupling Method
196.	Parameter Identification Research Of Transformer Windings
197.	The Exploratory Development Of Parameter Identification In DTC System Based On Colony Aptitude Arithmetic
198.	Dynamic Detection And Model Analysis Of Long-Span Cable-Stayed Bridge
199.	The Analysis Of Disease Cause Of Long-span Prestressed Concrete Bridges
200.	Engineering Structural Damage Detection Based On Modal Parameters
<<First <Prev Next> Last>> Jump to