The Practical Manufacturing Technique Research Of FRP Production By Autoclave Moulding

The most valid way of lower manufacturing cost of FRP is the adoption non-autoclave to model the technique, but owing to each host factory all adopt autoclave moulding, the international top should model the method is also a main current that makes the piece of FRP , therefore, how raise the product quantity and decline low cost in the method's aspect is the most realistic and meaningful problem that put to need to be resolve in each big host factory. This item is around autoclave moulding,combine the model number FRP piece to turn the production, openning practical manufacturing technique research of exhibition.Autoclave moulding is to will prepreg to anticipate to press the molding tool request to spread to put to heat to add to press to model in autoclave behind. In the whole manufacturing process each link has the direct influence to the products. The product needs to carry on the performance test after model to insure the quantity of the product, must have the repair project to carry on the repair for have the blemish product to guarantee the consignation rate of the product. The engineering turned and produced and needed to be a set of to model the more complete technique of after-sales service from the product to insure the batch quantity production.This text combines the engineering turns the production of FRP piece of the company, Pass the replacement of the resin and the fiber in prepreg, the application of domestic assistance material and the improvement of technical, the simplification of performance test data and the repair technical application, acquire a more perfect and practical technique of the whole set, and succeed to apply to the engineering to turn to produce medium. At the time of guaranteeing the product quantity, consumedly lowered the production manufacturing cost, biggest pushed my company autoclave moulding to model FRP the engineering of the piece turns the application, making have the special advantage in the FRP product compete. This item research for go together the industry autoclave moulding to model the piece of FRP to have bigger draw lessons from to expand the meaning.