Research On Quality Control Scheme And Automatic Testing Technology Of Radio Measurement And Control Equipment

The radio Tracking-Telemetry and Control equipment uses in track’s track survey, the telemetry data receive and the transmission, the control signal transmission and so on, the function is important, must maintain the good technical condition throughout. But, the current quality control method is backward, uses the efficiency very low manual control detection mode, examines the technical paper quantitative request which rests on to be insufficient. These malpractices do not favor the accurate assurance radio Tracking-Telemetry and Control equipment technology condition, restricts the equipment quality construction seriously, and does not meet the weaponry information-based development direction need.Proposed in view of this kind of situation this article raises the radio Tracking-Telemetry and Control equipment quality control level, needs to transform the traditional experience to manage the advancement thought, promotes the radio Tracking-Telemetry and Control equipment management information-based construction, take realizes the radio installation technical specification automation test as the foundation, using the networking, the computer technology, realizes attributes the radio Tracking-Telemetry and Control equipment technology status messages the highly effective gain, the transmission and the generalized analysis use, By accurate, has the radio Tracking-Telemetry and Control equipment technology status messages promptly, can thus make the maintenance, the service decision-making and for the maintenance, the service content and the way promptly provides the guidance opinion. According to this thought that this article studied has worked out the radio Tracking-Telemetry and Control equipment quality control plan, proposed that through constructed the radio experimental equipment message center to use in equipping the information the integrated management, constructed the wireless equipment test subsystem to realize the equipment technical specification automation test, thus gained each kind of key information highly effective. The message center to the radio Tracking-Telemetry and Control equipment life cycle process’s all previous service data, the test information, the maintenance information as well as the related management information’s collection and the statistical analysis, forms the complete radio Tracking-Telemetry and Control equipment file, by grasps the radio Tracking-Telemetry and Control equipment comprehensively the technical condition and the historical tendency.This article proposed the wireless equipment quality control is take equips the automated test technology as the foundation, therefore take the automated test as the key technologies to conduct the detail, chose some continuous-wave radar to take the object of study. The research content mainly includes: The standard this radar’s test flow and the test method, the guarantee gain information method is correct; Chooses the appropriate metering equipment, according to radar connection situation and formulation test method design automation test system’s hardware and software; Used the test facility situation and the connection situation in view of this system has carried on the uncertainty analysis for the system, further was clear about the system test confidence.Finally, the union this article plan research results and the continuous-wave radar automation test system’s development experience, proposed the radio Tracking-Telemetry and Control equipment quality control system’s construction development mentality.