Programme Of The Interface Between The Configuration Softw Are And PROFIBUS-DP

EIMS(Embedded Intelligent Monitoring System) is a new set of industrial monitoring system that is under development of us. This system takes advantage of the latest technology of the embedded field and integrates hardware with software. The developments of the system include the design of the whole system, the design of the interface of the hardware of the field bus and the driver of it, and adding the driver to the configuration software and configuration . Thus, we can build a system platform used in the industrial monitoring. During the developing of the system, the first time at home we integrated the PROFIBUS-DP with the Windows CE operating system and the configuration system running on the Windows CE system, that is MCGSE, through the PC/104 bus and made new experiment of the study. We have gotten some fruits, and provide the solid foundation for the further perfect of the system.Windows CE is the embedded operating system developed by Microsoft company and has been applied in the palm computer, the geography information location the car, the wireless communication and such fields. At the end of 2001, WINCE3.0 came to face the common users in china. At the beginning of 2002, WINCE.NET, having the function used in the monitoring field, was released in china. The future of it will be good because of so many merits of it. Before its release ,people used the other operating system such as UNIX and QNX to do development. MCGSE is a embedded configuration system developed by the KunLun TongTai company and runs on the WINCE.NET operating system with the merits such as the powerful function and advantageous utility. However, the drivers of the hardware applied in MCGSE is customized by the company. So it cannot be used in common, and not beapplicable to our system. Therefore the major task is writing a program to apply the hardware and the drivers we developed to MCGSE easily. In the program , I provide a automation client to communicate with MCGSE, and also provide a automation sever to communicate with the driver of the hardware developed by we. By this means the two parts can communicate successfully through this program. The drivers can be applied to MCGSE only when they realized an automation client that can take advantage of the properties of the automation sever provided by this program and provided a function to output the real-time data. Moreover, all the slavers can be linked with the hardware if they accord with the Profibus-DP protocols. So the program has reached the require of this article. Now there are so few people programming with EVC4.0. Therefore I cannot get enough information and help. I was researching alone in the darkness at the most time . So in this article I have made some innovations.