Computer-aided Directly Put The Mining System

Mining and conveying ore are two indispensable subsystems in mining working. The rationality and efficiency of them directly effect on the productivity and the profits of a factory. Furthermore, the accordance of them is of great significance to improving the working environment and ensuring secure working.As to the problem that the loading equipment didn't match the conveying equipment, which were found after the Zhongtiaoshan nonferrous company had applied the new mining ways, the author in this thesis has found out what caused the problem and how to solve it after thoroughly analyzing the problem, and then put forward a relatively feasible program under the current condition.At first, based on the theory of System Engineering, through analysis, this system can be divided to four subsystems: locating tramcar, loading mine controlling, dispatching conducting and mining calculating, thus a general program of the system was worked out. Secondly, based on the queue theory and probability theory, by studying dispatching conducting and tramcar locating, the dispatching arithmetic adapted to the technical conditions on the spot was worked out and the corresponding computer program was compiled. Meanwhile, the suitable conductors and detectors were chosen according to the result of tramcar locating analysis. As to the controlling subsystem of loading ore and mining calculating, through demonstrating the feasibility on three plans: supersonic detecting theory % active-echo detecting theory and photoelectric detecting theory, the supersonic detecting and controlling plane was chosen because of its superior performance, and the components of the system of supersonic detecting were introduced in detail. In the end, the hardware, software and information conveyance of the system were disposed in the perspective of computer controlling.