Loess High Cutting Slope Stability Analysis

On the base of the on-the-spot investigation of the high-cutting slop, to analyze the characteristic of the high-cutting slop, the characteristic of the slop stability, the characteristic of slide and the effect factor of the stability, the form of the slide and so on. Then according to the internal and external relative study data and the property of the bess itself for example the jointing and cranny are developed, the horizon of soil is not mean etc. to put forward the model of mathematic and mechanics of the bess high-cutting slop stable analyst. Through this new model to carry out the formula, and draw up the relative programmer to calculate, analyze, and compare with other existing model. This can not only test and verify the correcting of the new model and relative programmer, but also can draw a conclusion the quantitative analysis of the effect stability factor of the flight and steps, the top face of the slop, the horizon of soil and so on. At last, the new bess stability model is applied to the engineering practice, on the further this can test and verify the correcting of the new model put forward by this article, and solve the practice problems.