The Application Of Wireless Sensor Networks Based On Gprs, Xbee-ProWireless Communication Module

Using modern developed communications technology to master the high-voltage tower information in time is the focus of the study. Compared to wired data transmission, in the monitoring system wireless sensor network technology based on ZIGBEE has been widely used, which has the advantages of low power consumption, high sensitivity, flexible networking, and other advantages. This paper is the use of short-range communications technology to build a ZIGBEE network and combined with GPRS to achieve remote monitoring.It mainly overcame shortcomings of the whole GPRS network communication causing enormous economic waste and ZIGBEE network short-distance transmission. The ZIGBEE network adopt the topology of star network or MESH network. The whole ZIGBEE network ensure proper data transmission based on the data integrity through the GPRS network. In the ZIGBEE network, terminal nodes are working in the power-saving mode.It can wake up when required for data transmission sometime, which can effectively reduce the power consumption of the network nodes, fit the harsh conditions, provide a convenient for field, and reduce the possibility of data collision and interference. The module GPRS transimts the data of collecting node in ZIGBEE network, which take out of constraints of wired network and make the network have the advantage of flexible configuration.The article realizes ZIGBEE network creation in small scope. Using the XBEE-PRO wireless communication module to make a network including six nodes, realizing mutual correspondence, and then collecting the related information of each node through the collecting node. The collecting node is not only responsible for collecting information of each terminal node, but also responsible for GPRS communication, which is convenient for long-distance data transmission.