Z Company Plating Process Robust Design Research

Plating is the use of the electrolysis principle plated with a thin layer of another metal oralloy on the surface of certain metals, the use of electrolytic action to make the metal or othermaterial parts adhering to the surface of a metal film process thus serves to prevent corrosion andimprove abrasion resistance, a conductive, reflective, and enhance aesthetic effect. Electroplatingprocess to anti-corrosion surface abrasion, the role of the two to play beautiful bathroom plumbingdesign. The surface of the high-end bathroom plumbing facilities are very fine and durable,electroplating aspects of quality management for sanitary products, which is very important.Z is from OEM to ODM transformation, sanitary plumbing facilities in the manufacturingsector, the plating process is more important, because the plating process in the entire process hasbeen very rearward, than before the process is a relatively perfect product arrive after platingquality problems and rework, both from the efficiency or effectiveness of the plant is moreserious loss, so the importance of plating the link quality management is self-evident.This case study Z plating process, through robust design techniques in experimental designto this process analysis, design and optimization, and thus of the electroplating process forscientific control. The case before the plating process, and then elaborated on the robustness ofthe design principles and methods, and a brief analysis of the Z internal plating recent yieldvolatile. In the third part, by looking for more good additive formulations chrome processrobustness of the design, a detailed analysis of the chrome plating process, and completeoptimization of key parameters; Part IV will confirm this case by the parameters of the design andquality control research is valid, in comparison with the old technology can significantly improvethe plating effect.