Design Of Video Surveillance System Of Fracturing Completion Tools Laboratory

Shengli oilfield production courtyards for fracturing completion tools laboratory construction, the fracturing completion tools test will use high temperature and high pressure test equipment, and at the time of test,it doesn’t allow any people into the experimental area.To ensure the safety of the fracturing completion tools to test, need to deploy video surveillance equipment, real-time monitor the equipment running status, at the time of equipment under a state of abnormal operation, could help identify problems, and solve them as soon as possible, avoid the happening of the accident; At the same time, the need for field test in the process of high temperature and high pressure test to see if there is anyone into the real-time monitoring, to ensure the safety of high temperature and high pressure test personnel. Therefore, video monitoring system design for the fracturing completion tools lab is of great significance.This article first introduces the layout space of video monitoring system, and then according to the video monitoring system design principle, respectively the video acquisition module, the system signal transmission module, video storage module, two-way linkage alarm module, voice module, video display module, the system power supply module and module for video sharing scheme analysis and design, determines the monitoring system USES the remote video monitoring system, and for the design of the theme of the video monitoring system structure and its function. Secondly, through the analysis of video surveillance system equipment selection principle, the front end as the monitoring system, the audio acquisition equipment, video video storage, video transmission equipment, and the monitoring center related equipment has carried on the equipment type selection, finally determine the video monitoring system hardware equipment list. Again, through this video monitoring system to monitor stationing requirements analysis, the selected equipment can realize monitoring theory suggests that no dead Angle, design of monitoring system for monitoring putting; Then, based on the principle of video monitoring system, integrated wiring and matters needing attention, and this monitoring system for the integrated wiring system. Then to equipment installation and debugging of the system are studied, and the main functions of the system management software and its use. Finally, based on the factors affecting the reliability of the system and its influence mechanism is analyzed, respectively from the reliability and security of the system data, system grounding, lightning protection and signal anti-jamming four aspects on the reliability of the system design.