The Design And Analysis Of Application Status Of The Welded Pipe Chamfering Machine

This paper first briefly introduces the history of welded pipe, and the development trend of the future and the welded pipe, the main production technology and chamfering process. The current situation of the research for welded pipe chamfering machine at home and abroad have been investigated, and according to the investigation of the current situation of the research, this topic research goal and research content is put forward.This paper focuses on the existing welded pipe chamfering machine specific problems that exist in the actual process.It was analyzed and based on the study of existing welded pipe chamfering machine for the design of the following aspects:Frist, with the development of welded pipe towards to the large diameter big wall thickness and the welded pipe chamfering machine, the structure and working principle and limitations is proposed for the overall structure of the welded pipe chamfering machine and equipment layout of the design scheme, including the redesign of the cutter institutions, chip device, clamping device, and the pipe device. At the same time increasing the alignment device for welded pipe chamfering machine automation processing provides basic technical support. The optimization design expanding our scope of processing equipment, improve the stability of process, improve the quality of the processing. Second, selecting the largest pipe diameter and wall thickness at home and abroad, the optimized welding pipe chamfering machine process parameters are calculated in detail, including the design of the processing scope, the motor selection for agencies, selection of cutting tool and so on. All have been carried on the detailed calculation. Third, a brief introduction to the optimization of the chamfering machine electric control system of the overall scheme and composition and introduced the power box feed work process, the welded pipe chamfering machine workflow, at the same time putting forward the possible factors in the process of electrical interference sources and eliminate scheme. Fourth, The content was summarized in this paper, this paper make the conclusion that the function of optimized chamfering meet large diameter and big wall thickness of welded pipe processing requirements in the future, points out the shortages of this paper, and prospects the future research direction of welded pipe chamfering machine.