Research Of Intelligent Lighting System Based On C-Bus

Intelligent lighting system design significance lies in through by reasonable design,to improve energy utilization and achieve the purpose of reducing energy consumption,to make energy conservation and environmental protection and protect human health at the same time.In this paper,through the comparison and analysis of the control mode and the topology structure of the intelligent lighting system,combine the design and research of the distributed intelligent lighting system based on C-Bus is designed with the DIALux lighting design software.Through access to a large number of materials,carefully read the terms and conditions of the relevant technology,the comparison and analysis of the traditional lighting and intelligent lighting difference of the practical significance of building energy-saving lighting,besides the intelligent lighting system for human life and work to bring the convenience of a detailed description.By means of the comparison of several commonly used field bus,then the control mode of C-Bus and intelligent lighting system is put forward.At the same time of experimental analysis,using system software programming C-Bus V2.0 set the parameters of each element,through on the computer remote control to the operation of the entire lighting system,reflects the ease of installation and maintenance,convenient operation and other advantages.DIALux lighting design software is used to simulate the illumination space environment,and the distribution of illumination is determined,and the illumination calculation is carried out by the point by point calculation method.Finally through the application in the engineering example by C-Bus to analyze the parameters,considered energy-saving environmental protection,green lighting,economic and practical ideas to using LED lamps and lanterns,then to the C-Bus software design,and simulation analysis of data,put forward the design scheme of intelligent lighting system used in the Northeast Asia international financial Center building,laid a good foundation for the subsequent intelligent lighting control system research and development.Lighting design in the office building,the important place for a large area or in the two design must be carried out lighting simulation calculation,you can predict the illumination distribution of the simulation space in advance.Make full use of natural light to the interior space to provide lighting is to achieve energy-saving lighting one of the effective measures,for office building lighting,using intelligent lighting control system,make a detailed plan for lighting control strategy,in order to achieve energy-saving purposes.