The Research And Development Of 10m~3/min Same Plane Piston Air Compressor

In December 1995,Xi'an Jiaotong University vice president Peng Cheng Shu professor said: "compressor technology is closely associated with human civilization and social progress and development.The epitome of a hundred years of compressor technology progress as a scientific and technological progress of mankind.Although compression models numerous,each has its advantages and disadvantages.But due to the same plane piston air's compressor piston rod and the piston as a whole,the contact part of the piston and the cylinder working surface was contact spherical,and spherical piston and gas rainbow work mirror is in clearance fit,so compared with other air compressor compared,with plane piston type air compressor is not only simple and Mechanical efficiency is High manufacturing cost is also very low.This paper first familiar with the structure,material and design calculation of the same plane compressor,then given a simple introduction of the compressor and the classification,but also introduced a special kind of compressor.And then author taken "crank and connecting rod combined type bearing the same plane compressor" and "bearing and gear linkage type with plane compressor" for example,briefly introduction the same plane piston type air compressor,motion process.And then reference the design method of air compressor,design and calculation of the overall organization and performance on the same plane piston type air compressor.And take this as the foundation,identified with plane piston type air compressor valve plate to choose and establish the mathematical model,then makes the calculation of inter-cooler,choose appropriate cooling water pump.At last,tested the prototype,recorded and sorted out,analyzed and calculated the test results,that provides the experimental basis for the improvement of the prototype.