Intelligent residence control system is the efficient residential facilities and family agenda management system,With the intelligent residence control as the research subject,this paper aims to strengthen the man-machine interaction,realizes the friendly control.The main contents of this paper include:Designs the system overall architecture,system is divided into three layers,the upper is communication layer,middle is the relay control layer,the third layer is residence system;Bluetooth infrared repeater is implemented through the infrared device based on Arduino development board with the Bluetooth wireless module,analyzes the infrared control theory module,Bluetooth technology and Arduino related technologies;According to the design of system overall architecture,system function is divided into the hardware system and software operation management two subsystems;the infrared signal,relay information data table was designed and realized;Samsung remote control as an example,based on Arduino,with Bluetooth wireless communication technology,designs the Bluetooth infrared repeater,comprises the transmitting,receiving,encoding,decoding;analyzes the Bluetooth module selection,implements the Bluetooth transmission circuit and serial communication circuit;detailed implements the software operation and management section.Finally,designs the system hardware and software environment;test results demonstrates the intelligent residence control system can meet the requirements,achieve the intended target. |