Research Of The Smart Home Control System Based On STM32

Smart home is the main future home development,providing conveniences of living environment for the majority residents.It refers to a management system that connects the house electronic products,household equipment together through a wireless network and forms the room environment monitoring,fire,home automation.However,the current home control system is still in an early stage as a whole.Its product is more expensive,and standard is not uniform.Especially,there is a difference and no match between the product form and people's needs.Therefore,this thesis designed a Wireless network intelligent home control system based on STM32.This thesis introduces the overall design,the specific development of hardware and software and wireless transmission network ZigBee of smart home system,and researches and improves network routing algorithm.According to the requirements of this system design,the intelligent home control system in this article selects a hardware platform based on STM32,and uses the embedded system at the same time.The reasearch idea of the embedded system is that firstly,to design the circuit,using the Altium Designer softwares to complete the hardware circuit in the design process;then use the Keil uVision5 software to encode the system,and use the serial debugging assistant to simulate and debug;finally,test and analyse the simulation results,basically meeting the requirements of the system.The system includes LED lighting control,curtain power-driven control,wireless pole situation end,smog feeling and detection,wireless LAN network ZigBee connection,wireless network GPRS connection and reception,touch screen controller research and design,the simulation study Of mobile client system.The system uses a touch screen controller through the local connection control mode,and sets thetrigger signal of different modules through the middle position of each touch screen,achieving the corresponding function of the sensor module.Meanwhile,it also can use remote control to achieve the functions of each represented modules,through the analog mobile client to send instructions,by the transmission of GPRS network.