The Original Bamboo Building Of The New Node Structure Design And Construction Technology

In recent years,as China’s forest area dropped,some rural traditional architecture,especially Yunnan ethnic characteristics,there are many modern architectural style of the building,the building of the local people’s living conditions have been so greatly improved,however,Local people also bring great economic burden on China’s ecological environment cause serious harm,such that in the past national architectural style of art and villages gradually disappear.Of land in southern Yunnan growth of a renewable resource-bamboo,the resources can be used in buildings,has a very favorable environment and the revitalization of bamboo building conditions.Based on a large scale is not suitable for use in rural areas under the steel cement environment,bamboo is a resident of the building shall be to develop and explore the development of an important way.However,because at this stage unreasonable node configuration mechanisms leading to the development of bamboo construction bottleneck on,if you want to solve the problem,we should thoroughly research the node configuration.This paper is based on existing domestic and foreign raw materials bamboo building node collation and analysis,put forward new ideas for new research and development of bamboo nodes,hard and early strength gypsum and additives as fillers by fast,hollow bamboo node filled with plaster to ensure that within the scope of the original bamboo pieces node builds and solid wood components can be similarly phase,in order to reference node structure of steel and wood structure technology,to construct problem nodes bamboo building itself has to be fully addressed.Since the original bamboo building node is connected very difficult,at this stage,bamboo construction node reliability and durability is very low,causing serious constraints on the formation and development of bamboo building.So,whether domestic or foreign,if you want to carry out in-depth development of bamboo buildings,it should be original bamboo node connectivity problems fully resolved.However,if you want to solve the original bamboo building node is connected low reliability,durability and poor level of difficulty,the first step should be based on the existing original bamboo building standpoint,comprehensive collation and analysis of domestic raw bamboo node,as a lay a good basis for the development and research of bamboo building new node.This study presents new original bamboo node concept in building development constraints bamboo node problem solving has done a lot of work,but also accumulated a wealth of experience,research work in the future,should focus on research and analysis of the following issues.A paper fiber,Gypsum accurate,reasonable ratio problem,combined with the original bamboo overall performance issues.B for fire resistance,structural and mechanical properties of bamboo Gypsum node analysis.In addition,the following research work should be based on this study,based on the original bamboo building new node structure be properly and effectively applied to the concrete work,building bamboo node solve the problems of structure,in order to to achieve the original bamboo building healthy and sustainable development.