Study On The Application Of BIM In Structure Construction Drawing Design Based On Revit

The emergence of BIM(Building Information Modeling)technology is a new information revolution of engineering design,which has been widely concerned by the insider and the Chinese government.However,due to the fact that the BIM technology does not conform to the domestic design standards and design habits,it seriously hinders the application of BIM technology in China’s construction industry,especially in structural design specialty.Therefore,it is urgent to start the localization research of BIM technology.In this paper,I started the BIM application research for the structural construction design drawing,and put forward the BIM application localization solution of structural construction design drawing,the main research contents are as follows:(1)BIM application analysis of structure construction drawing design.By comparing the characteristics of the application of the structure construction drawing design in traditional way and in BIM technology,advantages and disadvantages of 3D reinforcement information expression law of PIEM expression,expounded the realistic meaning of combining the application of BIM technology in the structure construction drawing design with PIEM;and then analyzed its necessity and feasibility;finally,put forward the problems need to be solved of using BIM technology on PIEM.(2)The creation of family and shared parameter in the structure construction drawing design BIM technology application.Based on BIM software Revit as the platform,firstly,this paper research on Revit structure design mechanism,as the basis of the research on the structure construction drawing design;secondly,this paper classify the family and shared parameters of Revit,puts forward a method to deepen thedesign model of structural construction drawings in Revit,combined with the PIEM,created the family and shared parameters of Revit structure construction drawing design.(3)BIM application solution for structure construction drawing design.The paper mainly studies the problem of structural column,shear wall edge member,structural beam,structural slab in PIEM by using Revit as the platform,put forward the solution,and apply the solution on structure construction drawing design module of Revit-YJKS software,has realized the BIM application solution of construction member in the structure construction drawing design.Finally,through an engineering example test,verified the structural construction design drawing of BIM application scheme is feasible and effective,it can greatly reduce the designer workload,and it will meet the domestic format requirements for submitting drawings.The research of this paper has a promoting effect on the application of BIM technology in structural specialty,and it can be used as a reference for the localization development and application of BIM technology in other software developers and design institutes.