With the development of the tertiary oil recovery,heat and salt resistance hydrophobic associating polymers are welcomed because of its unique structure and good performance.In this paper,allylbromide and dimethyl-hexadecyl-amine were used to synthesis a long chain hydrophobic monomer(DMCs).We got the product P(DMCs-AM)by using DMCs and AM.The monomer P(DMCs-AM)was synthesized by FT-IR,NMR and SEM.The factors influenced on the polymerization were researched on the basis of the preparation of polyacrylamide.The solution properties of polymer,containing viscoelasticity,temperature and salt sensibility,shear-resistance,rheological property and surfactant(SDS,SDBS),were measured by using viscometry as the main measurement.The research showed that P(DMCs-AM)had high viscosity retention in 120?.In salt and surfactant solutions,the P(DMCs-AM)also had the phenomenon of thickening.For further imoproving the temperature sensibility of hydrophobic associating polymers,P(DMCs-AM-AMPS)was synthesized by using DMCs,AM and AMPS.The monomer P(DMCs-AM)was synthesized by FT-IR,NMR and SEM.The factors influenced on the polymerization were researched on the basis of the preparation of polyacrylamide.The experiment results indicated that the temperature sensibility of P(DMCs-AM-AMPS)was superior to P(DMCs-AM).The viscosity retention ratio of P(DMCs-AM-AMPS)was 25%in 120?,which was higher than the 17%viscosity retention ratio of P(DMCs-AM).The other solution properties of polymer,containing viscoelasticity,salt sensibility,shearing-resistance,rheological property and surfactant(SDS,SDBS)were also researched.Finally,Resistance coefficient(RF)and Residual resistance coefficient(RRf)were calculated by core flooding experiments.The result showed P(DMCs-AM-AMPS)was superior to P(DMCs-AM)in the ability of mobility controlling and permeability reducing. |