The Design And Research On Solar LED Street LAMP Lighting Control System Based On ZigBee Technology

With the rapid development of present urbanization,urban lighting applications are in a stage of rapid development,so the urban lighting energy consumption by more and more.The shrinking of traditional energy reserves,already more and more strong enough to support the development of modern urban civilization,thus for the development and utilization of new energy and its significance.Solar LED street lamp lighting system with its unique advantage has gradually become the main direction of development and application of urban lighting,but it also has obvious drawbacks,for example with the increase of urban scale of solar LED street lamp,street lamp of a wide range of remote centralized regulatory issues before the municipal workers,and ensure the safe and stable operation system,realize the energy saving lighting and intelligent lighting as solar street lighting system is the main problem with a wide range of application.In view of the LED has high electrical/optical conversion rate,save electricity environmental protection,long life,impact resistant,fast switching speed,the advantages of small volume,this topic will be closely integrated LED light source and solar power,designed and developed a solar LED street lamp intelligent control terminal,and reached the predetermined performance requirements,control terminal program using C language development.Paper in order to realize the street lamp remote monitoring in deep analysis and research IEEE802.15.4 standard and ZigBee protocol stack,on the basis of a remote monitoring scheme based on ZigBee wireless communication technology,through CC2530 micro controller chip of TI company,successfully set up the mesh type bottom lamp ZigBee wireless monitoring network,terminal node sends the data to the center coordinator,center coordinator with a debugger via a serial port protocol control editor to build the data transmission channel,the central control unit adopts TCP/IP protocol to connect to the web server,and the control device can be sent via GPRS module will damage the street number to the maintenance staff's cell phone,implements the street since the alarm function.System design based on the network structure of the client and the server,the client via TCP/IP protocol connect to the Internet server receives the streetlight node real-time working parameters,for the street lamp remote monitoring.Paper using c++ programming language to complete the design and implementation of remote monitoring software,the software with the server through socket TCP/IP communications,based on the database implementation street lamp information storage and management,through Altium Designer PCB design software to draw the system.Paper finally,the system hardware and software debugging analyzed,and some of the problems in the process of system design are discussed.