Research On Embedding Power Line Communication In Photovoltaic Power Optimizer

In Photovoltaic(PV)system,DC-DC power optimizer(DCPO)is an option to solve mismatch problem and to maximize output power.At the same time,data links among DCPOs are often required for system monitoring and controlling.The communication method design in PV system has now become a popular subject.This paper proposes a novel power line communication(PLC)method for the DCPOs,in which the data of a DCPO is modulated into the control loop of power converter,and then transmitted through the series-connected dc power line to other DCPOs.The causes and consequences of PV module mismatch problem is first analyzed,which leads to the meaning of installing DCPO.After making comparison of different types of DCPOs,Buck DCPO is employed for further discussion.To analyze the quality of communication,the communication model of the system is built.In the process of communication,differential phase shift keying(DPSK)modulation and discrete Fourier transformation(DFT)demodulation are employed.Furthermore,the noises of the system,including switching,maximum power point tracking(MPPT)and additive white Gaussian noise(AWGN),are discussed and measured to evaluate the signal-to-noise ratio(SNR).At last,an experimental system including 6 DCPOs is established and tested,which verifies the feasibility and effectiveness of the proposed method.