Home Intelligent Anti-theft Alarm System

With the increasing consumption level of people,more and more high requirements for the home environment,the intelligent home system came into being,step by step into people's lives,into thousands of families.The intelligent home system integrates the technology of single chip microcomputer,intelligent home appliance,network communication,sensor,equipment automation and so on,the home home home home home home home home home home home home home home home home home is controlled through the detection,the processing,the remote transmission,the remote control,in order to meet the people's higher and higher high efficiency,the safety,the comfortable,the energy saving request.This paper adopts the hardware solution of GPRS module,S3C44B0X controller and ZigBee intelligent home general wireless network system.Hardware module,collect the relevant signal by corresponding sensor,The coordinator of CC2530 is transmitted to CC2530 by the CC 2530 router via wireless network.The coordinator then transmits the signal through RS485 port to S3C44B0X master system for analysis.At the same time,the S3C44B0X main controller is connected with the user's mobile phone or control panel through the GPRS module to realize the remote control of the home environment.This design mainly integrates the contents of microprocessor,network communication,sensor and language programming.The combination of hardware and software not only realizes the basic function of the design,but also has certain extension function,which is beneficial to the system function expansion and replacement.