At present,most shipyards rely on the designer's experience and reference solution in the design of the ship anchor system.After finish the design,a wood former test will be carried out to verify its rationality and accuracy.When there are some problems occurred in the test,the design results need to be revised and the wooden model need to be re-produced.However,it takes a lot of money and time,and the production cycle of the ship will be affected too.As the development of ship construction,the technology of computer simulation is applied in naval construction.In this thesis,research the anchor system of one 13,000 m3 LPG carrier through the computer simulation to verify the design scheme.Meanwhile,the reliability of the simulation result will be verified by means of the comparison with the result of wood former test.By making a interaction design between two-dimension and three-dimension,the efficiency and quality will be promoted,which accord with the concept of modern naval construction. |