| Environmentally friendly renewable energy technologies such as wind and solar energy systems are among the fleet of new generating technologies driving the demand for distributed generation of electricity. Power Electronics has initiated the next technological revolution and enables the connection of distributed generation (DG) systems to the grid. The challenge is to achieve system functionality without extensive custom engineering, yet still have high system reliability and generation placement flexibility. Nowadays, it is a general trend to increase the electricity production using DG systems. If these systems are not properly controlled, their connection to the utility network can generate problems on the grid side. Therefore, considerations about power generation, safe running and grid synchronization must be done before connecting these systems to the utility network.;This thesis introduces a new grid-synchronization, or more visibly a new "power signal processor" adaptive notch filtering (ANF) tool that can potentially stimulate much interest in the field and provide improvement solutions for grid-connected operation of DG systems. The processor is simple and offers high degree of immunity and insensitivity to power system disturbances, harmonics and other types of pollutions that exist in the grid signal. The processor is capable of decomposing three-phase quantities into symmetrical components, extracting harmonics, tracking the frequency variations, and providing means for voltage regulation and reactive power control. In addition, this simple and powerful synchronization tool will simplify the control issues currently challenging the integration of distributed energy technologies onto the electricity grid. All converter-interfaced equipments like FACTS (flexible ac transmission systems) and Custom Power Controllers will benefit from this technique. The theoretical analysis is presented, and simulation and experimental results confirm the validity of the analytical work. |
