| Laminar axisymmetric propane air diffusion flames were studied at pressures 0.1 to 0.725 MPa (1 to 7.25 atm). To investigate the effect of pressure on soot formation, radially resolved soot temperatures and soot volume fractions were deduced from soot radiation emission scans collected at various pressures using spectral soot emission (SSE). Overall flame stability was quite good as judged by the naked eye. Flame heights varied by 15% and flame axial diameters decreased by 30% over the entire pressure range.; Temperatures decreased and soot concentration increased with increased pressure. More specifically, the peak soot volume fraction showed a power law dependence, fv ∝ Pn where n = 2.0 over the entire pressure range. The maximum integrated soot volume fraction also showed a power law relationship with pressure, f¯v ∝ Pn where n = 3.4 for 1 ≤ P ≤ 2 atm and n = 1.4 for 2 ≤ P ≤ 7.25 atm. The percentage of fuel carbon converted to soot increased with pressure at a rate, etas ∝ Pn where n = 3.3 and n = 1.1 for 1 ≤ P ≤ 2 atm and 2 ≤ P ≤ 7.25 atm respectively.; Analysis of temperature sensitivity to variations in E lambda(m) revealed that a change in E lambda(m) of +/-20% produced a change in local temperature values of about 75 to 100 K or about 5%. |
