High-pressure homogenization using a new flat valve homogenizer in combination with enzymatic digestion with a crude protease was investigated as a means of releasing Se compounds from zoological and botanical matrices prior to slurry introduction GF-AAS. Timed trials with four zoological certified reference materials (CRMs), three botanical reference materials (RMs), and a food crop indicated that Se release was quantitative after homogenization or became quantitative within 1 h of digestion at 60°C.;The same technique was employed on five animal feed samples.;A new model of homogenizer equipped with ceramic homogenizing valve was evaluated in terms of analyte metal contamination levels within the final sample dispersion.;Five animal feed samples and four wood pulp samples, were investigated for their content of Cu, Fe and Mn using high-pressure homogenization as the sample preparation technique prior to GF-AAS. Dispersions of dried animal feeds were sub-sampled reliably after 7 days of storage at 4°C. Trials on pulp samples indicated that pulps could be sub-sampled reliably after 1 day of storage. (Abstract shortened by UMI.). |