| The physical state of the seedbed is of importance to the plant environment as it influences some important processes in the soil such as seedling emergence, water and solute transport, and ease of root penetration. This is affected to a large extent by tillage process, the tillage implement type and the geometry of the implement used.;A field experiment was carried out on a clay soil to determine the effect of the geometry of bladed tillage implements on some soil physical properties after tillage. The soil properties evaluated were bulk density, mean clod size distribution and total pore space after tillage and the extent of loosening achieved.;Implement parameters considered were blade width, rake angle and depth of operation of the implement. Two blade widths of 75 and 150 mm were evaluated in combination with three rake angles of 30, 60 and 90 degrees. Each tillage implement was drawn through the soil at four operating depths of 100, 150, 200 and 250 mm.;Larger rake angles were observed to result in larger mean aggregate sizes and greater bulk density reductions when compared to smaller rake angles. Greater reduction in bulk density was observed with the wider of the two blade widths evaluated. Mean clod size after tillage was also observed to be large for the wider of the two widths evaluated. Irrespective of width and rake angle, greater operating depths resulted in larger mean clod sizes and greater reductions in bulk density as compared to shallower operating depths. Fractal analysis showed the extent of fragmentation to be greater at shallower operating depths, hence the small mean clod sizes obtained. |
