Adaptive settings of distance relay for MOV-protected series compensated line with distributed capacitance considering wind power

Series compensated lines are protected from overvoltage by metal-oxide-varistors (MOVs) connected in parallel with the capacitor bank. The nonlinear characteristics of MOV devices add complexity to fault analysis and distance protection operation. During faults, the impedance of the line is modified by an equivalent impedance of the parallel MOV/capacitor circuit, which affects the distance protection. The intermittent wind generation introduces additional complexity to the system performance and distance protection. Wind variation affects the fault current level and equivalent MOV/capacitor impedance during a fault, and hence the distance relay operation.;This thesis studies the impact of the intermittent wind power generation on the operation of MOV during faults. For the purpose of simulation, an equivalent wind farm model is proposed to generate a wind generation profile using wind farm generation from California independent system operator (ISO) as a guide for wind power variation to perform the study. The IEEE 12-bus test system is modified to include MOV-protected series capacitor and the equivalent wind farm model. The modified test system is simulated in the MATLAB/Simulink environment. The study has been achieved considering three phase and single line to ground (SLG) faults on the series compensated line to show the effect of wind variation on the MOV operation.;This thesis proposes an adaptive setting method for the mho relay distance protection of series compensated line considering effects of wind power variation and MOV operation. The distributed parameters of a transmission line are taken into account to avoid overreaching and underreaching of distance relays.;The study shows that variable wind power affects system power flow and fault current in the compensated line during a fault which affects the operation of MOVs for different fault conditions. The equivalent per-phase impedance of the MOV/capacitor circuit has an effect on the system operation and line protection. Distance protection study is also performed with variable wind power, different line compensation levels, and other system conditions. Results show that variable wind power affects apparent impedance calculation of distance relay through the variable equivalent MOV/capacitor impedance. Underreaching and overreaching issues of the distance relay are discussed. Based on the results, a variable distance relay setting is proposed to mitigate the negative impact. Both fixed and variable distance relay settings are presented and compared to each other. The results demonstrate the ability of the proposed adaptive setting method to resetting the distance relays to adapt to various system conditions, including three wind generation and different compensation levels.