Research On Architectural Technical Conditions For Stage Equipment

In recent years,under the general trend of China’s Grand Theater construction,the theater building carrying the function of performing art is developing in full swing.It has promoted the great prosperity of cultural undertakings and the great development of regional economy.However,the architectural function of the theater is not perfect,and the use rate of the stage is not perfect.A large number of investigation and research results show that in the construction process of many theaters,due to the lack of necessary stage process design,or the lag of stage process design,many defects in theater buildings have seriously affected the use function of theaters,and the phenomenon of "transformation of new theaters" has appeared.Special stage equipment is the so-called "capital raising" for the construction technical conditions of architecture,fire protection,structure,electrical,HVAC,decoration and other disciplines.The technical condition of stage equipment construction is to conduct more in-depth research on stage machinery,lighting,sound and video based on the research of stage process design.Through a large number of engineering practice,this thesis summarizes the definition of technical conditions of stage equipment construction,and defines the work content and depth requirements of technical conditions of stage equipment construction.The research on the capital raising of the Architectural Specialty of the stage equipment technology room focuses on the analysis of the location,size and area of the stage equipment room.The summarized summary table of the stage equipment technology room not only provides the design basis for the architectural designer,but also provides the function room information for the future operation.The stage equipment structural load requirements focus on the analysis and Research on the reserved size and stress distribution of the structural load of the stage equipment room and its related areas,and summarize the analysis methods such as the summary table of structural load requirements and the stage equipment load calculation sheet,which provides the design points required by the stage equipment for the structural engineer.The process design of power supply and distribution of stage equipment puts forward requirements for the size of power distribution required by stage equipment and the location of power distribution points.The summarized summary sheet of power supply and distribution of stage equipment and calculation sheet of power supply and distribution of stage equipment provide the necessary technical conditions for power supply and distribution of stage equipment for electrical engineers to deepen the design and construction drawing design.To sum up,based on the research on stage process design(written by Li Guoqi),this study is an in-depth study on the funding requirements for the construction technical conditions of stage equipment in architecture,structure,electrical and HVAC disciplines,which has played a positive role in promoting the in-depth design and construction drawing design of Architects,structural engineers,electrical engineers and HVAC engineers.