Study On NC Machining Technology In Web

With the wide using of computer technology, inteligentizing and network are becoming the main direction of the numerical control machine tool. At present, suffer and small enterprises possess the numerical control machine tool relatively in arrears, these machine tools use RS-232 serial communicating with outside. The big disadvantage of this correspondence is the LOC can not be too long and the remote control is unable achieved. In allusion to the technic problem of network manufacturing in enterprise, put forward "Study on NC Machining Technology in Web".1. Using a economic and viable method apply with numerical control machine tool which in existence, thus make them fit the requiring of netword manufacturing. The remote control of numerical control machine tool is due to the problem when in numerical control machining how to solve the NC program of receiving and sending. According to the ability of machine tool, distribute the machining task in reason, save the NC program. We can solve the problem of machine tool with web and using Internet put NC program in every machine tool. We introduce protocol conversion uniting web strategy to get over the machine tool with RS-232 serial.2. In remote control, the host computer has the ability of remote transfer, which numerical control machine tool can "control" the host computer to send NC program. When we need the program in host compuer, we must send require file to the computer. The require file is in fact a simple numerical control program. According to numerical control type, save in the program path of numerical control system. We need change the require file name to receive the NC program which we want. Of course, he file name must in the host computer, then we can send require file. The last, using INPUT(or REAEK DATAIN etc. according with numerical control system)on MDI operation panel.