Performance Analysis Of C Design And Mechanical Virtual Prototype Steel Punching Machine

Punching forming technology is an advanced processing method of the modernmachinery manufacturing, traditional processing technology, often use drilling, laserprocessing, etc., the application of new material punching processing technology, solvesthe small foot section, thin rod difficult to make the parts processing, it is to use theinstalled on the machine of the mold, the blanking pressure plate, thereby gaining a certainshape, size of punching, punching machine is widely used in manufacturing of punchinghole forming equipment, is the thin wall parts or some small parts stamping processingequipment, application is very wide, not only can be processing, metal materials andprocessing of non-metallic materials, the use of the new technology to increase the degreeof automation machinery and help to improve production efficiency and reduce cost, istechnical innovation, has certain competitiveness in the technology and equipment has justgone into the market, just received the affirmation of some users, and have a certain sharein the market soon, at present this technology can meet the demand of more and morecustomers, and in this area has received the expert’s affirmation.The punching machine designed for C section steel for punching, the whole machineis made up of four parts, namely the host part, control part, transmission parts, bracket.Combining with a company of punching machine research and development, on thebasis of the original punching machine, low efficiency, high degree of automation is notof them, such as stamping material single defect was improved, in the design, to the workdevice of the punching machine structure design in the first place, on this basis, the use of3d design software Solidworks, realize the conversion between3d and2d, in the designof the components needed to complete the virtual prototype and virtual assembly andglobal interference inspections at the same time, the parts for assembling can beproductive, manufacturability and assess, the design of the structure of the problem besolved, and then fixed parts, components, parts of2d and3d design, build the virtualprototype model of the complete, the last on the basis of complete virtual prototype usingAnsys software, such as the mechanical properties analysis of key parts, verify therationality of the design.