Orbit Design Of Automatic Shot Blasting Machine

In order to achieve clean and strengthened workpieces, shot blasting was used to clean the surface of workpieces which based on the shot blasting technology. According to the composition and operational principle of the hanger type shot blasting machine, it can be seen that the shot blasting machine cannot clean the workpieces continuously. Consider this inconvenience, hanger track can be improved to make sure the hanger type shot blasting machine cleans the workpieces continuously.Track mapping, observation and analysis, theoretical calculations, improve and repair methods are adopted in this project. And all the tasks run through the main line of shot cyclic system. Based on the above design ideas, the equipment not only meets the theory, but also complies with the practical conditions and the environment.The investment casting processing and properties, predominance and shortcoming of investment casting for high chromium wear resistance materials used in shot blasting machine were investigated in this paper. It analyzed the compound shell casting technology process and operate feature through Katai shot mechanical company 100T compound shell casting production line. Furthermore, optical microscope and Rockwell Hardness Tester were used to investigate the microstructure and mechanical properties of high-Cr iron. Effect of different heat treatment on microstructure and mechanical properties were also dicussed in this paper.Depth study and numerous comparison analyses about automatic shot blasting machine were listed in this paper which based on the realistic project. The influence of corollary equipment on the entirety work, and detail theoretical calculations were gave in this paper as well. All the studies in this paper have certain reference value to the research of shot blasting machine.