Data Acquisition And Monitoring System Based On KINGVIEW Oilfield Metering

The current memory in the field between the measurement problem of low equipment reliability, maintainability, and between measurement data collected within open enough, the data can not be shared and so on. Most fields have among more than a dozen of measurement, but mostly very far from the control center, staff every day for oil temperature, concentration, pressure and other data, multiple acquisitions, waste a lot of manpower and material resources. And it can not be solved in time between failures occur within the measurement field problems. Therefore, based on the current status of the development and application of measurement between the field, according to inter-field measurement data acquisition and remote control design requirements, Design The Data Acquisition and Control System of Oilfield Measurement Based on KINGVIEW. The system selects Siemens S7-200 PLC site control, application KingView6.55 configuration software system configuration.System is the main choice of smart meters, pressure sensors, flow sensors for the measurement field between field data collection, using Siemens S7-200 PLC and EM235 data to process module for processing the collected data to establish the next crew PLC and PC configuration between king communication between the application configuration software metering oilfield real-time monitoring system configuration. System configuration process, create a scene between real-time simulation system control interface and measurement control, the system can achieve on-site data display and query, police inquiry, historical data query, creating a database and a system of data daily report, monthly reports, annual reports, etc. Achieve the ability to switch between the various configuration screen.Between oil metering system designed for metering fuel oil metering multi-segmented metering valve control, six wells achieve metering oil production by switching multi-way valve between the valve. PLC controller by constant speed motor drive isolation valves open oil pipeline segment or channel pipeline segments, PLC control with each start and stop pumps and valves. Kingview screen real-time display of the flow of oil in the oil passage, changes in the status of the oil level in the tank, and remote monitoring of the pump work, start and stop valves. The system implements automated data collection field between measurement and dynamic remote management, Simplifies the production process and oil metering mode, effectively improve the management level between the measurement of oil field development, playing a good role in promoting for the measurement of oil between oil exploitation integrated information management.