Design, optimization, and control of tensegrity structures

The contributions of this dissertation may be divided into four categories.; The first category involves developing a systematic form-finding method for general and symmetric tensegrity structures. As an extension of the available results, different shape constraints are incorporated in the problem. Methods for treatment of these constraints are considered and proposed. A systematic formulation of the form-finding problem for symmetric tensegrity structures is introduced, and it uses the symmetry to reduce both the number of equations and the number of variables in the problem. The equilibrium analysis of modular tensegrities exploits their peculiar symmetry. The tensegrity similarity transformation completes the contributions in the area of enabling tools for tensegrity form-finding.; The second group of contributions develops the methods for optimal mass-to-stiffness-ratio design of tensegrity structures. This technique represents the state-of-the-art for the static design of tensegrity structures. It is an extension of the results available for the topology optimization of truss structures. Besides guaranteeing that the final design satisfies the tensegrity paradigm, the problem constrains the structure from different modes of failure, which makes it very general.; The open-loop control of the shape of modular tensegrities is the third contribution of the dissertation. This analytical result offers a closed form solution for the control of the reconfiguration of modular structures. Applications range from the deployment and stowing of large-scale space structures to the locomotion-inducing control for biologically inspired structures. The control algorithm is applicable regardless of the size of the structures, and it represents a very general result for a large class of tensegrities. Controlled deployments of large-scale tensegrity plates and tensegrity towers are shown as examples that demonstrate the full potential of this reconfiguration strategy.; The last contribution of the dissertation represents the method for integrated structure and control design of modular tensegrity structures. A gradient optimization method is used for this particular class of problems, and it proves to be very efficient. The examples that are given demonstrate the impact of the distribution of the prestress on the optimal dynamic performance of the structure.