Creep-fatigue crack growth behavior of 1 percent chromium-1 percent molybdenum-1/4 percent vanadium rotor steel

Posted on:1994-10-07

Degree:Ph.D

Type:Dissertation

University:Georgia Institute of Technology

Candidate:Adefris, Negussie Belihu

Full Text:PDF

GTID:1471390014494260

Subject:Engineering

Abstract/Summary:

Computational and experimental work was performed to simulate creep-fatigue interactions in 1%Cr-1%Mo-0.25%V steel at 538A simple definition of the creep zone size was introduced as the locus of material points where there is a significant amount of creep strain. This definition impacts the manner in which C...

Keywords/Search Tags:

Percent

Related items

1	A study of the hydrogen effects on the microstructure and tensile properties of (alpha(2)+B2) titanium-25 percent aluminum-10 percent niobium-3 percent vanadium-1 percent molybdenum titanium aluminide alloy
2	Studies On Formation Mechanism Of 5-HMF In Shengmaiyin And The Influence Of Processing On Chemical Components In Schisandra Chinensis Baill.
3	Effect of different percent loadings of nanoparticles and food processing conditions on the properties of nylon 6 films
4	Effect of controlled mixing on the rheological properties of deep-fat frying batters at different percent solids
5	Based On Improved BP Neural Networks For Predicting Separation Percent In Electrodialysis Process
6	Investigation Of Saturated Vapor Pressure On Low-percent Methanol-gasoline Blends Fuels
7	Measurement and prediction of wax precipitation for Alaskan North Slope crude oil transported in the Trans-Alaska Pipeline System
8	Research Of Apocynum Venetum Fast Chemical Degumming Technique
9	Visual, microscopic, and colorimetric examination of calcium and magnesium levels in parenteral nutrition solutions containing 6 percent amino acids, 25 percent dextrose, and 65 mMol of phosphorus/L
10	ENERGY REQUIREMENTS FOR THE MAINTENANCE OF MEN'S SHIRTS COMPOSED OF 100 PERCENT COTTON, COTTON-POLYESTER BLENDS AND 100 PERCENT POLYESTER