| Use the coupling agent and the dispersing agent carry on the surface treatment to nanometer ZnO. Acrylate and styrene were selected as monomers in preparation of core-shell structure by in-situ polymerization with bacterial resistant nanoZnO modified by titanate coupling agent, and water-soluble carboxymethyl cellulose sodium(CMC-Na) was used as dispersing agent to prepare nanoZnO/styrene-acrylate blending composite latex. Effect of nanoZnO surface modified was evaluated by angle of contact,activating index, oil-loving degree and infrared spectrogram. spread the membrane performance, bacterial resistance and ultraviolet screen of nanoZnO composite latex were also systemic researched. Around also has prepared the modified nanoZnO/Acrylontrile-butadienen-styrene (ABS) and nanoZnO/ polypropylene(PP) copolymer composites. Effects of modified nanoZnO content on bacterial resistance, vicat softening temperature, mechanical properties as well as nanoZnO/PP compound material low temperature impact intensity of the composites before and after UV aged were investigated. Above studies indicated that, the activating index and oil-loving degree of modified nanoZnO was maximum when coupling agent content was 10% of nanoZnO; dispersivity of modified nanoZnO was optimum as pH value was 5~6 and CMC-Na content is 3%; excellent membrane performance, bacterial resistance and ultraviolet screen of composite latex could be attained when modified nanoZnO content was 0.1%~0.4%.and not only vicat softening temperature and mechanical properties of the composites could be improved, but also excellent anti-aging protectivity could be attained by adding modified nanoZnO properly. Vicat softening temperature of ABS composite with 3% modified nanoZnO was 102℃, which was 3.2% higher than that of pure ABS resin; Comparing to pure ABS, strength, breaking elongation, hardness, impact strength(with and without notch) of the composite with 3% modified nanoZnO before and after UV aged were increased by 37.4% and 44.6%, 0.9% and 357%, 44% and 29%, 13.8% and 44.7% (with notch), 44.4% and 12.4%(with notch).; to the backwoods coli, the golden color staphylococcus bacteriostasis rate respectively achieves 92.3% and 87.5%;vicat softening temperature of PP composite with 3% modified nanoZnO was 162.2℃, which... |