| In reflection to the fact that market original binding ink continuity was bad, capability of resisting ultraviolet radiation and water were poor, color distorted badly and the parameter was secret. This article manufactured resistance to ultraviolet radiation and water ink which had high realistic color and high articulation, based on satisfying the printing machine request of surface tension and viscosity. The result could offer investigation base for the quality of ink mixing and the data of resistance to ultraviolet radiation and water ink for industrialized multicolor ink; This article manufactured ink by orthogonal experiment, and measured the surface tension, viscosity and absorbency. The three printing guidelines was similar to market original binding; The article analysed the mechanism of surfactant and polymer for surface tension, viscosity and absorbency. Surfactant changed surface tension, polymer not only change viscosity, but also change surface tension and capability of resisting ultraviolet radiation and water. Excellent four colors DIY inks were printed into photograph, and then compared to printing photograph of market original binding ink between color and capability of resisting ultraviolet radiation and water. The results showed that: Their color density was close, and the DIY ink capability of photostability is 3～4 times compared to market original binding ink, and the capability of resisting water is better than market original bingding ink. The quality of liquidity and intermission printing was good.
|
PDF Full Text Request