The Design Study Of Mechanical Systems For Milling Machines Of The Oil Tank In Mill

Using the air conditioner is used on rotating to the compressor and the spindle of the interior of the bearing on the processing of the gas tank when the oil tank by the turn of the compressor and interaction in the compressor and the bottom of the bearing oil to the oil tank with the ends of the form of the cycle, thus leading to go to the compressor at work arising from the heat, and lubrication bearings to reduce friction, and to prevent corrosion. This method is air conditioning down to the compact and efficient energy and low for a slight noise out of the important safeguards. but the current in the gas tank processing technology and manufacturing, and pinning as a process such a process of getting more and more outstanding, and apparently no air compressors the rapid development of production. Therefore, against the current process of the main, a process to substitute for the innovation process. Research design and fast, reliable, simple in structure of the oil mill and a system to improve efficiency and reduce production costs and ensure the quality of products such an important role.First, the paper analyzed the background. To the importance of the compressor and the significance of the lubricated oil tank of fluid power theory and refuse to an effect in the oil tank of machining mechanism into shape. Then discuss the current in the gas tank processing the present situation and needs to be solved by technology, refine out this paper to the chief research direction and tasks.Secondly, a new thesis of the oil tank processing method—in the oil tank innovation took。The process by the end of the standard cone milling knife together with the reasonable and the promotion of spiral of the elevator on the machine, and established a system design scheme. the overall。With the processing and papers for the workbench, each tool for the position and movement between was analysed and a system design offers of support.Finally, the papers within the milling machine was used a mechanical system design, and mainly engaged in the domestic private key to the mill parts of the mechanical design and the system of selecting, assemblies, software and hardware etc.to combine。And to repetition of the sample to validate the legitimacy of the system design. Within the milling machine was used in low cost and high efficiency and economic benefits of special equipment, in the development of the domestic manufacturing industry in the compressor and the market is large, and the PLC control system, development and short, will operate quickly. So the milling machine as the spiral in the gas tank processing substitute for the process has a very positive, very strong Market.