Design And Analyse For Battleplan Cabin's Automatism Examination Test Equipment

Along with the fast development of the scientific technology, aviation field also take enormous change. The local fighter jet has developed three generations. Compareing with the first and second one, the third generations has the more outstanding battle ability. So it's kit products have been more reqired. For example: The control box is not only required having control and manipulate ability, but also having the signal display ability; In order to improve the dependability and service lifes, signal box has finished the conversion from incandescent lamp to gleamy flat, and all displays in the cabin are concentrated to adjust the light by only one product, avoiding the inconsistent phenomenon in light adjusting; In the first and second generations fighter plane, few and single functions switches installed in HOTAS system. But the third generations fighter plane not only uses every kind of switches, but also uses the high performance pressure sensor to lock down the battle target.Aimed to the characterisic of data acquisition ,through the analysis of hardware and software design and the design of the anti-jamming of hardware, this paper discuss the development of a realtime acqisiton measurement system.This measurement system is mainly used to finished the following measurement function of 12 products including 9 control boxes(KZH-97~105) 2 (JSG-1 2) and a (YMG-1): (1) Testing the state of all kinds of lamps, on or off; (2) Testing the state of light-guiding pale, on or off; (3) Testing the funtion of all kinds of fuses, switching on or switching off; (4) Testing all kings of the voltage of continuous; DC; (5) Testing all kings of the voltage of continuous; AC; (6) Testing the state of all kinds of switchs and buttons, on or off and the relation of the logic connection; (7) Testing the contrling knob and the simulative display of the pitching of the radar antenna.(8) Testing the X-Y cursor and it's simulative display; (9) Testing the pressure switch and it's simulative display.This testing platform are mainly prepared to the reliability-test for multi-type & multi-chip.and record the result at the same time.To one product,it is only that could be judged eligible that each component of it runs smoothly.it provide the effect-analysis the reliable data, which can greatly contribute to prefect designs and avoid the assembling errors.