Research On High Power Factor Flyback Converter With Multi-Output

Owing to its small volume, light weight, high efficiency, succinct circuitry, high reliability and great capability of self-equalizing output loads in different circuitries, the Fly-back Converter becomes the optimally topological form of designing auxiliary power supply of high frequency switching power and driving power supply of power switching.Along with the harmonic pollution of power network is paid more and more attention, the quality of the power network is requested more and more, many research have been done on how to restrain and eliminate those harmonic pollution, consequently, the technology of power factor correction (PFC) increasingly becomes the hotspot of research.In this paper, the Fly-back Converter is mostly investigated with the PFC technology integrated, and an IGBT drive power supply of multi-output and mutual-isolation is designed.In this article two functional modes of the Fly-back Converter (Continuous Conduct Mode and Discontinuous Conduct Mode) are particularly analyzed, which include their characteristics, applications, the critical pattern of two functional modes is argued, both the exact boundary from the angle of circuit parameters is crystallized, at the same time, basic principle of PFC under the DCM mode is introduced, which settle theoretical basis for the subsequent design; by establishing the mathematic model of the converter, a further investigation of the configuration is made, qualitatively and quantitatively, analyzed to settle exactly theoretical basis for the subsequent emulation and the experimental parameter; from the angle of steady-state analysis, the transfer function of the system is deduced to establish dynamic small-signal state equation, emulating the system with the help of matlab, then according to the simulation result and the theory of PFC revise the system, lastly, we adopt the project which add a zero-pole compensator to the voltage loop, by this way, a satisfied system performance is gained and the PFC scheme is ensured successfully; finally, based on the previously-done work, we combining with the situation of specific design requirement, acquired the numerical value of each unit devices in this converter,...