Research Of Steady-state Permanent Magnet Actuator Improvement On 12kV Outdoor Vacuum Circuit Breaker

Permanent magnetism actuator is a new generation vacuum circuit breaker mechanism. It obtains general attention because of its less components, high reliability, non maintenance and good match of power feature and reaction feature. These merits are not analogous by traditional mechanism. Permanent magnetism actuator is widespread applied at medium voltage breaker field in the world.Research object in the paper is single steady-state permanent magnetism actuator of 12kV outdoor vacuum circuit breaker which has been applied at state electric grid. Chief characteristic of this paper is that against to practice products to proceed to profound research. Through finding reason and settle scheme, practice problem is settled. Products can be more reliable, more stable and more perfect.In this paper, researching the single steady-state permanent magnetism actuator switching current and the manually switch-on program about 12kV outdoor vacuum circuit breaker, when the switching current is large, the aim is to reduce it. Counterforce and dynamic feature of permanent magnetism actuator with two kinds of drive modes are calculated and analyzed, and then calculation result is verified by test. To Analyze switch current of two drive ways in order to find a drive way that lab saving to reduce the switch current. With the comparing analysis of the dynamic feature of permanent magnetism actuator in two drive way, adopting four-step Runge-Kutta and Newton iteration method to solute, through secondary development of ANSYS, using C and APDL language to compile program, dynamic feature calculation is realized. In manually switch-on, stored energy of switching on spring actuator is used to supply to switch on energy for permanent magnetism actuator, proposing two schemes, and settle the validity and feasibility by experiment.Large quantity test research is used to verify scheme during research course. In this paper, detailed description the switch on and switch off tests average switch on and switch off speed test and the interrupting test principle method, test method is discussed in this paper, generalizing problem and solving method during test.