Solar Cell Optimization System Base On NI LabWindows/CVI

As human energy consumption for the rapid speed and volume increase, solar energy such as the increasing importance of environmental protection and the use of development. Yet because of the existence of some technological bottlenecks, solar cells do not always high conversion rate (less than 30 per cent conversion rate). So the solar system architecture design is very important.This paper aims to find how to build a reasonable solar system, how to make rational use of limited solar conversion rate, the use of certain system optimization, makes solar cells generating capacity is improved.Papers solar cell structures optimized system is mainly divided into three parts:1 Adoption of the solar system after a mathematical model, analysis, in theory, put solar system optimization methods.2 through the use of LabWindows /CVI software according to the mathematical model, the development of simulated solar system, calculated that the possibility of optimization theory.3 Finally, combining theoretical calculations and automatic control system optimization design of solar cells, solar system installation methods change - from static installation (solar collection point of the same) to change the dynamic installation (solar collection point of view according to a certain mathematical model - Movement), to improve the solar energy system to receive radiation, thereby to improve solar power.