Application Of Waste Metal In Device Art

Based on the circular economy to explore a set of method of scrap metal recycling, to save resources, reduce energy consumption, protect the natural environment and promoting economic development. First analyzes the concept of scrap metal, has been clear about the scrap metal were misplaced resources. Then carries on the analysis from the aspects of the value of scrap metal summarizes than scrap metal recycling scrap metal recycling, scrap metal as installation art materials and is the best way to solve this problem, is to scrap metal by means of art into a device works of art. Through discourse on the relationship between the scrap metal and installation art, as well as to the material characteristics of scrap metal, forms the aesthetic analysis, combined with the method and production process of scrap metal pick analysis summarized a set of metal scrap in the application of installation art method and application of the principle, finally found a way to protect ecology, resource conservation. Scrap metal recycling is the only way in the installation art, designers should design work at the same time, should not only consider the work of beautiful problem, consider the length of work life. Extend the service life of metal scrap can not only enrich the expression of stylist, also can achieve the continuation of history, and can realize the recycling of scrap metal resources. For scrap metal to change design ideas, even when new installation should be easy to assembly, disassembly simple. It should also be the high-tech road, through a computer for precise design and installation. Work if there is a part of the body is damaged, can be simple and dismantling change new material or form, to boast skillful and variability of the works. Mode should be the breakthrough metal material production, material production figure how to reuse after dismantling ahead, it will form a kind of recycling a large cycle. Finally, in the hope that cause social for scrap metal recycling in the installation art seriously, make full use of, scrap metal, can improve the structure of the new design at the same time also insisted that sustainable resource development policy in our country, filled the gap on the knowledge of this field in our country, are proposed for future metals design based on a new path.