The Technology Of Real-time Monitoring With Three-dimensional Model In Bracket Spraying Equipment

The issue of physical force monitoring technology to create a platform for the next UGinexpensive, versatile, portable, and easy to set up a monitoring system based on theWindows operating environment. Let China to Japan as further automation into variousSMEs.Firstly, according to the design requirement of bracket spraying equipment, preparationof touch screen and CX-Programmer program. In the Windows operating environment tocreate a platform based on UG, cheap, strong versatility, portability and easy to build thevisual monitoring system.Update NX animation simulation environment model by a new way. Not only do notknow NX update model premise callback function source code, update using a QuickMacrolookup handle model associated with the key values. And the time to trigger the handlevalue, achieve the updated NX model objective.Using a new way to use NX spreadsheet driven. To avoid the increasing of the operationtime, the spreadsheet data and run slower increase caused by. Through the Excel drive formthe carrier, the position data of each link configuration read from within the PLC throughthe DDE synchronized to the UG inside, the position data in UG and PLC synchronization.In the process of running state monitoring equipment, do not use the NX API callbackfunction or the NX log application to trigger the running state of the message box, throughthe QuickMacro "to find the word" similar to "teach" way to complete the function, makethe platform more universal and transplantable.Using the PLC stack functions made an offline report program, and can be online withKingview program to print. Now mostly industrial equipment report function through theHMI or is connected to the host computer to realize. Commonly used machine for the origin is achieved through two sensors, the first sensorto slow down and find the Z to the signal, the second sensor is the braking position. The useof a sensor of the device origin position, get the same high positioning precision by areciprocating motion of the servo motor, reduce the cost of the equipment.CX-Programmer prepared using automatic adjustment of a simulated cylinder speedalgorithm. Effective feedback of common cylinder is only a starting point and end pointmagnetic magnetic open open, unable to meet the monitoring requirements in the cylinderspeed slower case. This algorithm can update model provides new location data and withadjustable throttle valve automatic adaptation.The last part points out some deficiencies of this topic, and put forward some methodsto solve these problems, improve personal thought but also to verify.The last part of this paper pointed out some deficiencies, and made a number ofimprovements for the personal view of these deficiencies, but also to be validated methods.