.gdx1/x2 Nv Flip Hard Packer Installed (fz) New Bus Control System

Tobacco packaging machine GDX2 (the FZ series) in the machinery, the electrical aspect has the very high stability, for our country tobacco enterprise development, expanded has made the tremendous contribution. Along with the electronic technology and the time development, as well as this machine service life question, this kind of machine should be by the renewal type. But frugal embarks from our country, as well as various smoke factories is actual using the level looked, the elimination is one kind of not realistic choice. Therefore, it is necessary to carry on the technological transformation to it, enables its to continue for the tobacco enterprise to develop the contribution strength. What this article discusses is the introduction new main line control system as well as the programmable controller (the FZ series) the machine carries on the transformation to GDX2．Uses Germany Siemens high performance in this research topic S7-400PLC to take the control system the core are partial, takes between the entire scene equipment and the controller data key position with the INTERBUS main line, and colored uses the SIEMENS liquid crystal to touch the screen to take on the position machine, completes the entire unit the breakdown, the speed, the production data demonstration. Thus greatly enhanced system the reliability, openness, has been possible the extension, caused system the failure rate largely tore duce, effective work rate distinct enhancement.Below this research topic mainly contains the content:(1) Uses S7-400 PLC to take the control system core, all controls duty completes by PLC, all electric appliances part installs in the PLC control cabinet, the PLC system design is an independent control cabinet, the scene equipment electric cable direct company receives on the PLC electricity cabinet the coupling then。(2) Uses the INTERBUS main line achievement to connect data key position between the controller and the scene equipment, the configuration INTERBUS network system and is connected through its bus control unit and the PLC control system。 (3) Cancels originally controls the cabinet nine warm controlling, carries on the temperature hypothesis by on position machine, module realizes the temperature PID control with the Siemens function moduleFM455。(4) Uses an axis encoder to carry on the GD packaging machine main engine phase examination。(5) Uses the Siemens the FM453 localization module control inner edge paper and the trademark paper compensates step machine。(6) Configuration software carries on the disposition and the edition using SIMATIC WINCC to GD packaging machine each kind of resources, the processing event reports to the police with the system reports to the police, files away and the history to the real-time data files away the data the inquiry function.