Ucb, Monitoring And Control Devices, Automated Inspection And Maintenance System To Build And Test Methods

Space TT&C system holds important responsibility on promoting the development of space cause of our country. With the accelerating development of spaceflight technique, the application of the unified microwave system in under foot TTC station is more and more popular. The development of unified microwave system needs more automation in its daily monitoring & control. The projrct of automatization monitoring & control system is setup.General purpose interface bus (GPIB) has been bordly used in constructing automated test system. It integrates virtal instrument techonology, computer technology and the powerful testing apparatus. GPIB has the adavantages of high speed and high precision testing, good expandability. So, the automatization monitoring & control system are based on GPIB bus.In this paper, the methods of constructing the automatization monitoring & control system and the methods of test are studied. In order to ensure the expandability and maintainanility, the programming based lab Windows/CVI, and the thinking of design for platform software.The introduction of the actual research for the automatization monitoring & control system and the test/control system based GPIB bus are given in the first chapter. The second chapter presents the requirements of the design for the automatization monitoring & control system.The thinking of the hardware and the software method of the automatization monitoring & control system are presented in the third chapter.According to the methods of communication and control, the forth chapter shows the programming of parameter testing.And in the fifth chapter, Calibration Method of the whole system and the analysis of the unsuerment of the test result are givened.In the last chapter, the paper points the conclusion of the whole system.