Nylon Sabot Structure Apfsds

The dissertation is concerning for the nylon sabot which is used on 30 mm armour-piercing fin-stabilized discarding sabot projectile and fit to the rifled gun. The content includes the configuration of nylon sabot clearance mesh and how to ensure to the technics of pour-mold and so on. The dissertation grope for the projectile which has used stuff structure technics above by ANSYS analyse of split second force and experimentation on gunnery.Then we will know how about the projectile move inside and outside the bore. All of this work is to find a way that how we can to use the nylon on the project. By investigate we find that nylon sabot which uses the clearance mesh system is work better. because of the force is little than before. And the force onto root of tooth are average. But there is a problem coming with aggrandizement of clearance between sabot and projectile, the max-force is changed. The space longer the force bigger. So the parameter of pour mold influences intensity of nylon sabot. Now we can improve to fit demand by improve the pour mold and so on. Because of the new stuff applied, the weight of projectile is less, the velocity is upto 1350m/s even more.