Based On The Dvb-t Receiver Card Hardware Design And Implementation

The paper is about to introduce you the process of design and facture of a PCI card ,which is able to receive DVB-T broadcast signal .And the DVB Multi-Protocol encapsulation broadcasting data is supported.In this design,what are adopted are as follows: PHILIPS' TDA10046HT DVB-T CHANNEL tuner made by CHENGDU XUGUANG ELECTRONIC CO., PCI9030 SMARTarget I/O acceleration made by PLX CO., FPGA of EPIK30TC144-3 made by ALTERA CO., which is the interface of PCI9030 and tuner, supplied with programs, including registers configure data in E2PROM for PCI9030 and programs in FPGA which are compiled by myself,addition to driver of the DVB-T tuner developped by the PHILIPS CO..Then the function of system hardware procession platform of the DVB-T data receivion card is realized. PCI bus interface ,PCI board and host machine work together in the detail realization.I complete the hardware work on the card, including design of the whole card, FPGA interface program and evaluation of all of the registers of PCI9030, protraction of schematic and pcb of the card,debugging the hardware part of the card .